The Micro Motion HPC015P (DN3) is a specialized 1/8-inch Coriolis meter engineered to redefine the limits of flow measurement. Capable of operating at an incredible 15,375 psi (1,060 bar), the HPC015P provides unrivaled accuracy and reliability for the world's most demanding high-pressure processes.
Available through
| Feature | Performance Data |
| Nominal Line Size | 1/8 Inch (DN3) |
| Max. Operating Pressure | 15,375 psi (1,060 bar) |
| Max. Flow Rate | 504 kg/hr (1,110 lb/hr) |
| Liquid Mass Flow Accuracy | Up to ±0.1% of rate |
| Liquid Density Accuracy | ±0.001 $g/cm^3$ |
| Gas Mass Flow Accuracy | ±0.5% of rate |
| Fluid Temperature Range | -46°C to 200°C (-50°F to 392°F) |
| Wetted Material | High-Strength Stainless Steel |
Unrivaled Pressure Rating: Designed to safely and accurately handle up to 1060 bar, making it the primary choice for deep-water subsea chemical injection and supercritical fluid applications.
Direct Hydrogen Measurement: The HPC015P is optimized for the high pressures required in Hydrogen dispensers, providing the repeatability and custody transfer accuracy needed for modern clean energy infrastructure.
Smart Meter Verification (SMV): High-pressure lines are dangerous to dismantle. SMV allows you to verify the sensor's health and calibration in-situ, ensuring system integrity without exposing technicians to high-pressure hazards.
Multivariable Efficiency: Replaces separate sensors by providing simultaneous mass flow, volume flow, density, concentration, and temperature measurement—all from one ultra-high pressure device.
Zero Maintenance Reliability: With no rotating parts or bearings to wear out, the HPC015P eliminates the common failure points found in volumetric or turbine meters used in chemical injection.
Flexible Connectivity: Supports various transmitter options, including the Emerson 5700, two-wire configurations, or direct-connect models (no transmitter required) for compact integration into dosing skids.
Skid Optimization: The compact 1/8-inch footprint and direct-connect capability make it ideal for high-density chemical injection skids (CIS).
Advanced Diagnostics: Monitor for entrained gas or fluid consistency changes in real-time to protect expensive high-pressure pumps.
Global Safety Compliance: Fully certified for hazardous areas (ATEX, IECEx, CSA) and safety-instrumented systems (SIL2/SIL3).
The Challenge: An offshore platform required the precise dosing of corrosion inhibitors into a subsea well at 12,000 psi. Traditional mechanical meters were clogging and required monthly maintenance, leading to production risks.
The Hanyu Solution: The operator installed the Micro Motion HPC015P from
The Result: The HPC015P handled the 12,000 psi load with ease, maintaining a stable ±0.1% accuracy.
The Impact: Maintenance-related downtime was reduced to zero. The operator saved over $100,000 per year in chemical waste and service costs, while SMV provided digital proof of meter health.
Q: Can the HPC015P handle high-pressure gases like Hydrogen?
A: Yes. It is specifically designed for high-pressure gas measurement (up to ±0.5% accuracy), making it a leading solution for the 700-bar hydrogen refueling industry.
Q: Does the extreme pressure affect the accuracy?
A: No. The HPC015P is engineered with thick-walled tubes that maintain their measurement sensitivity and accuracy even at the maximum 1,060 bar rating.
Q: Is it suitable for cryogenic fluids?
A: The sensor is rated down to -46°C, which covers most high-pressure industrial and chemical applications. For colder cryogenic needs, please consult Hanyu Zhilian for ELITE series cryogenic options.
